At EZ Shower Repair & Tiling, we replace cracked, loose and missing bathroom tiles without retiling the whole room. Our bathroom tile replacement service is backed by a5-year workmanship warranty and focuses on reinstating the waterproofing beneath affected floor tiles.
Call us today on +61 406 671 114 to arrange for a free inspection.
If you are wondering whether you might need to repair or replace your tile, this quick guide might provide some clarity.
Scenario
What it usually means
Repair or replace?
Why
Hairline surface crack
Minor surface damage
Repair
The tile may remain firmly bonded
Chipped edge or corner
Local impact damage
Repair or replace
Depends on size and location
Tile cracked through
Movement or impact
Replace
The tile has lost its strength
Drummy or hollow tile
Voids or failed adhesive
Replace
It may loosen or crack
Loose or lifted tile
Adhesive failure
Replace
It must be rebedded correctly
Tented or peaked tiles
Missing movement joints
Replace affected area
Pressure must be relieved
Water staining
Moisture beneath or around tile
Inspect first
The leak must be repaired
Generally speaking, repair is cheaper and quicker than replacement. Here’s some further information about thecracked tile repair vs replacement question.
Why Bathroom Tiles Crack, Lift or Come Loose
You might also be wondering why old tiles become compromised. Well, here are some of the main reasons.
Spot bonding
The installer used dabs of adhesive instead of a full bed, therefore leaving some areas unsupported. This is a common issue in many older Brisbane bathrooms.
Missing or filled movement joints
By nature, tiles can expand and contract. If they don’t have open movement joints and flexible silicone, then pressure can build until the tile starts to crack, lift or form a peak.
Substrate movement
Brisbane is well-known for its reactive clay soils which react to wet and dry periods. This can cause building movement, which then places pressure on rigid floor and wall finishes.
Water under the tile bed
A compromised membrane, grout line or silicone joint can allow moisture to seep beneath the tiles. This can weaken the adhesive and may cause tiles to debond.
At EZ Shower Repair & Tiling, we offer a leak detection service that can check for hidden moisture.
Get a Free Quote
Please fill out the form below and one of our Shower Repair Leak Experts will contact you. We look forward to helping you.*
Matching Your Existing Tiles
During their free consultation, many clients ask us to match their existing ones as best we can. Here’s what you need to know.
We can remove a tile and inspect the manufacturer’s code on the back of it. Then we will contact our network of Brisbane suppliers to see if they have them available.
You should know that even if we find the exact same tiles, their particular production batch may have a slightly different colour than yours. Additionally, years of cleaning, wear and sunlight can change the appearance of your existing tiles.
We may be able to take a matching tile from out-of-sight places like beneath the sink, behind the toilet or behind the bathtub. We can then fit the closest replacement ones in those concealed areas.
If we can't match your tiles, we can suggest a few alternatives. They include adding a feature strip, replacing one shower wall or bathroom floor, or completing a full renovation of your bathroom.
How We Replace Tiles Without Compromising the Waterproofing
Replacing your tiles in a timely manner without damaging your waterproofing can be very difficult. Here’s how we achieve that feat.
1.
Inspection and tile assessment
We identify why the tile failed. We also check the surrounding tiles for hollow sounds and assess whether the existing colour, size and finish can be matched.
2.
Careful removal
Our team will cut out the surrounding grout first. Then they will remove the broken tile in small sections to protect the adjacent tiles and limit any potential for damage underneath.
3.
Substrate and membrane reinstatement
All adhesives and loose materials are cleared away. We then fill voids before patching the membrane and joining it to the surrounding waterproofing.
4.
Relay, regrout and seal
The replacement tile is installed on a full adhesive bed, before being finished with epoxy or colour-matched grout. We also silicone flexible junctions before water testing.
Yes, in many cases we can. Our team may be able to carefully remove grout to protect the surrounding ceramic or porcelain tiles, shower screen, bath or vanity.
If an exact match is unavailable, we may suggest a feature tile, concealed tile swap or replacing one complete bathroom shower wall as your options.
Our friendly staff perform tile replacement for bathroom renovations across the Brisbane community. This includes Chermside, Carindale and Indooroopilly.
Bathroom and Balcony Retiling | Expert Tiling Services
Professional bathroom and balcony retiling services to enhance your space. Offering high-quality materials and expert installations for durable, stylish results.
Service Type: Bathroom and Balcony Retiling
Service Areas:
Brisbane,
Gold Coast,
Sunshine Coast,
Toowoomba